|
Post by zadock on May 5, 2017 7:26:23 GMT -7
1. When I try to change WiFi connections via RF commands I get this error: "(Command error) Wifi config 2 not configured"
2. I used the Advanced Setup Instructions to configure the WIFI and everything was fine until the last step. Step 3 says to go to the /home/pi directory and issue the following command: sudo ./wificonfig. When executing that command I get the following error: sudo: ./wificonfig: command not found
3. I confirmed that the sudo command is there and working for that directory. So I assumed the problem was a missing wificonfig file. I used the search command, including hidden files, but was unable to locate the wificonfig file anywhere on the system.
4. Other than the above the WiFi works fine. On reboot the system will select whichever WiFi is availabe in accordance with the priorities I established.
5. Any suggestions on how to find and/or create tge wificonfig file are appreciated.
Ken By the way..... Great DSTAR Imagine. You folks do amazing work.
|
|
|
Post by W6KD on May 9, 2017 12:24:46 GMT -7
The only way to make the RF-commanded wifi configs work is to configure the hotspot with the DStarConfig.exe windows utility included in the download. It writes some special delimiter info into the network config file that the program needs to manage wifi configs...manually configuring your wifi will work for a single config, but not for RF-commanded swaps between multiple configs as provided for in the automated setup.
It's possible the wificonfig script file was not updated/included in the image after I made the switch from Raspbian Wheezy to Jessie at v2.0
Regards
|
|