mabry
New Member
Posts: 1
|
Post by mabry on May 28, 2016 9:13:08 GMT -7
I have been successfully using a DVAP with my ID-51 for over a year now. Recently I purchased a DVMEGA bundle and am having some problems getting it going. I configured the DVMEGA with the same frequency as the DVAP to use the setting in my ID-51 for convenience. I assume that this is OK, and am not running the DVAP at the same time, of course. I configured the DVMEGA repeater and gateway using the WDs Widget software that came pre-installed from GigiaParts. I seem to be communicated from my iD-51 with the DVMEGA, as I am hearing the periodic voice announcements. The gateway screen shows logs of activity on REF001C that I am trying to connect to. But I cannot receive any audio from the reflector. On the gateway screen, I see in the "Links" section: Repeater 1: WD4IOI B Not Linked. When I try to link to REF001C as I have done using the DVAP, I see on the repeater screen: Received a non-repeater packet, ignoring. I'm putting in a link to a screenshot of the two apps for information. www.dropbox.com/s/hf49c5m6tbibks3/2016-05-28_10-03-20.png?dl=0Any ideas or suggestions? Thanks in advance Mabry WD4IOI mabry@beachdoziers.com
|
|
|
Post by W6KD on May 29, 2016 12:02:58 GMT -7
This question is specific to the Western DStar image you're using...best bet is to either e-mail Brian (GW6WTK) or perhaps post on the ircddbgateway Yahoo! group.
Regards
|
|