k8oe
New Member
Posts: 7 
|
Post by k8oe on Oct 27, 2016 13:06:21 GMT -7
I would like to sometimes use our club callsign with a radio to my dvmega on raspberry pi 3. Will this work?
Thanks,
K8OE
|
|
|
|
Post by W6KD on Oct 27, 2016 23:16:30 GMT -7
Yes, it should. If it does not, run DStar Config on the desktop and make sure "Restrict" is set to Off (which it already should be by default).
Regards
|
|
k8oe
New Member
Posts: 7
|
Post by k8oe on Oct 28, 2016 7:29:52 GMT -7
Ok. It does appear to let me link to a reflector for example but the refllector dashboard shows my personal callsign rather than the club callsign that is programmed into the radio. Is there a way to change this? (Raspberry pi/dvmega/Dstar commander set up with my personal callsign, of course).
Thanks,
K8OE
|
|
|
|
Post by W6KD on Oct 28, 2016 10:15:22 GMT -7
No...the gateway is what is linked to the reflector or repeater, not the radio. You will see your callsign in the last heard list on the reflector dashboard, and it will be identified on a radio or dongle receiving the signal as coming from your callsign, but the link is between the gateway (hotspot) and the reflector.
Regards
|
|
