|
Post by robert on Jan 7, 2015 14:59:45 GMT -7
I have configured this many times so I am pretty sure that part is correct. I opened the ports on my router. when I try to connectit says Dextra fails to connect on auto start up. When I try with the Radio nothing is showng as received. I also saw error 104 on log. HELP 73 Robert
|
|
|
Post by W6KD on Jan 8, 2015 12:53:53 GMT -7
There's no need to open ports using this image.
"It" says Dextra fails to connect? What's "it"? What exactly is the error, and where are you seeing/hearing it?
The 104 error is common when the callsign servers are not operating (which seems to be a lot lately). In absence of the callsign server, the software uses the included/updateable hosts files to resolve gateway addresses.
Make sure you don't have a duplex offset set in your radio.
Regards
|
|
|
Post by robert on Jan 10, 2015 19:03:33 GMT -7
Bob,Radio is set on simplex.It shows irc DDB connected.Then it scrolls through a bunch of users and callsigns.Then it says in the ircDDB gateway log DXtra link to XRF020 A has failed to connect ( this is with the auto connect set.when I try to manual connect by the radio nothing happens.somtimes error 104 also is seen.
73 Robert
|
|
|
Post by W6KD on Jan 11, 2015 9:39:09 GMT -7
Robert--are you using my DStar Commander image?
The gateway should not be attempting to connect using DExtra--DStar Commander has the gateway set up to use DPlus instead of DExtra for connections to the XReflectors, specifically to avoid problems with port forwarding. So I'm a bit confused as to why you'd be seeing a failed DExtra connection...
Regards
|
|
|
Post by robert on Jan 11, 2015 21:11:09 GMT -7
Bob, I am not using My DStar Commander. I have Raspian OS, with the G4KLX D-Star Repeater & IRC DDB & VNC Image. I have configured it to what all the You tube videos say to set everything to. It does not work..... 73 Robert K4WZV
|
|
|
Post by W6KD on Jan 12, 2015 7:50:55 GMT -7
OK...I'm going to make the obvious suggestion here--try downloading and flashing the DStar Commander image for the dvMega from the link in the pinned topic. A lot of work went into the image to incorporate tested solutions to the kinds of problems you're having now. The image includes a preconfigured load of Raspbian Linux, the G4KLX ircDDBGateway and DStarRepeater programs, the DStar Commander front-end, an interactive setup you can run on your PC right after flashing the card, and setup documentation.
Regards
|
|
|
Post by robert on Jan 12, 2015 16:10:17 GMT -7
Bob, Thank You, Thank you. Everything works great. I sure wish I knew about the DStar Commander to start off with.
73 Robert K4WZV
|
|
|
Post by W6KD on Jan 12, 2015 19:42:26 GMT -7
Glad you got it working. See ya on DStar.
Cheers
|
|