v1.20 RPi2/DVMEGA issues
Nov 16, 2015 21:55:13 GMT -7
Post by ynot on Nov 16, 2015 21:55:13 GMT -7
Greetings, I hope a new member is welcomed.
We have downloaded DStarCommander_dvMega_V1_20.zip and unzipped it, burned the image and configured with the included DStarConfig.exe. It is being used with the DVMEGA dual-band RPi radio on a Pi2.
On first boot, the email returned is:
####### begin email #######
DStar Commander V1.20
Configuring from Windows interface
Gateway config set
XXXXX B
Freq: 441.875
Ethernet IP:
192.168.1.108
####### end email #######
We are able to successfully link to and talk with the desired targets e.g. "REF001CL" in the UR field of an Icom ID-51 radio, returning to "CQCQCQ " after the linking is successful. The DStar Commander enhancements are non-functional however, such as "FRQ44115", "REBOOT " and "SHUTDOWN".
We'd very much prefer to have access to the DStar Commander enhancements if at all possible.
Please advise?
We have downloaded DStarCommander_dvMega_V1_20.zip and unzipped it, burned the image and configured with the included DStarConfig.exe. It is being used with the DVMEGA dual-band RPi radio on a Pi2.
On first boot, the email returned is:
####### begin email #######
DStar Commander V1.20
Configuring from Windows interface
Gateway config set
XXXXX B
Freq: 441.875
Ethernet IP:
192.168.1.108
####### end email #######
We are able to successfully link to and talk with the desired targets e.g. "REF001CL" in the UR field of an Icom ID-51 radio, returning to "CQCQCQ " after the linking is successful. The DStar Commander enhancements are non-functional however, such as "FRQ44115", "REBOOT " and "SHUTDOWN".
We'd very much prefer to have access to the DStar Commander enhancements if at all possible.
Please advise?
